Site Study for Dedicated Power Line Connection | समर्पित पावर लाइन कनेक्शन के लिए साइट अध्ययन
To conduct a Preliminary Site Study survey for establishing a dedicated power line connection from Power Distribution infrastructure to the proposed site/premises, evaluating both new line construction and tapping into existing infrastructure.
When we go to set up a plant or factory, the first requirement for construction is water and electricity. Continuous construction work and the operation of the plant depend on reliable electricity. Therefore, when we select electricity connectivity at the beginning, we consider trustworthy electricity sources and examine them carefully.
पावर डिस्ट्रीब्यूशन इंफ्रास्ट्रक्चर से प्रस्तावित साइट/परिसर तक एक समर्पित पावर लाइन कनेक्शन स्थापित करने के लिए एक प्रारंभिक साइट अध्ययन सर्वेक्षण आयोजित करना, नई लाइन निर्माण और मौजूदा इंफ्रास्ट्रक्चर में टैपिंग दोनों का मूल्यांकन करना।
जब हम घर बनाने की सोचते हैं, तो सबसे पहले हम बिजली और पानी पर ध्यान देते हैं। बिजली और पानी के बिना न तो घर का निर्माण हो सकता है और न ही घर चल सकता है। इसी तरह, जब हम कोई प्लांट या फैक्ट्री लगाने जाते हैं, तो निर्माण की पहली ज़रूरत पानी और बिजली होती है। निरंतर निर्माण कार्य और प्लांट का संचालन विश्वसनीय बिजली पर निर्भर करता है। इसलिए, जब हम शुरुआत में बिजली कनेक्शन चुनते हैं, तो हम विश्वसनीय बिजली स्रोतों पर विचार करते हैं और उनकी सावधानीपूर्वक जाँच करते हैं।
We must know about our requirements such as voltage, load, etc. We should know the initial load of the factory, how much this load can increase in the future, and what the final stage load will be. We must also know where our factory will be located, its route map, and in which state and city it will be situated.
हमें अपनी आवश्यकताओं, जैसे वोल्टेज, लोड आदि के बारे में पता होना चाहिए। हमें कारखाने का प्रारंभिक भार, भविष्य में यह भार कितना बढ़ सकता है, और अंतिम चरण का भार कितना होगा, यह पता होना चाहिए। हमें यह भी पता होना चाहिए कि हमारा कारखाना कहाँ स्थित होगा, उसका रूट मैप क्या होगा, और यह किस राज्य और शहर में स्थित होगा।
We must know about the electricity rules of that state, such as distribution, transmission, and generation regulations. We should also know what the local infrastructure is and how electricity availability looks in that area.
We must identify whom we need to meet and where we need to go. A report must be prepared that includes all the necessary information.
हमें उस राज्य के बिजली नियमों, जैसे वितरण, पारेषण और उत्पादन नियमों, के बारे में पता होना चाहिए। हमें यह भी पता होना चाहिए कि स्थानीय बुनियादी ढाँचा कैसा है और उस क्षेत्र में बिजली की उपलब्धता कैसी है।
हमें यह पहचानना होगा कि हमें किससे मिलना है और कहाँ जाना है। एक रिपोर्ट तैयार करनी होगी जिसमें सभी आवश्यक जानकारी शामिल हो।
After preparation, the time comes for execution. In this phase, we must take care of everything and ensure that all required documents are ready.
तैयारी के बाद, कार्यान्वयन का समय आता है। इस चरण में, हमें हर चीज़ का ध्यान रखना होगा और यह सुनिश्चित करना होगा कि सभी आवश्यक दस्तावेज़ तैयार हों।
Document Review: Study load data, actual min/max voltage requirement, premises map, nearby industry, nearby localities, distribution company’s hierarchy & sanction power of offices, address of distribution company’s nearby offices.
Visit nearby substations (220, 132, 33, 11 KVA) as per required min/max voltage. Check Points:
Stakeholder Coordination: Schedule meetings with distribution company officials, local contractors, nearby industry representatives, and local authorities. Discuss:
Map potential routes from substations to site. Identify and document:
Use GPS/GIS tools to record: Existing power line crossings, Proximity to site/premises, Terrain and accessibility.
Option 1: New 132KV Line from existing Substation
Assess: Timeline for bay expansion, Route complexity and cost, Environmental and social impact.
Option 2: Tapping Existing Line
Evaluate: Load capacity of existing lines, Technical feasibility of tapping, Need for formal agreements with any Party, group or individual.